Fichet-Bauche NECTRA Serie Mode D'emploi page 34

Activating / deactivating operators
3.2 Activating and deactivating operators
3.2.1 Activating operators
C
Type in the master code +
C
When the green light is displayed, open the door.
*
C
Door opened, type in master code again +
C
Type "9"+
C
Select an operator (8 possibilities) by typing :
- "1" +
or
- "2" +
or
- "7" +
or
- "8" +
C
Type "1"+
The operator's code is activated.
If you wish to modify another setting, go back to point
Once an operator's code has been activated for the first time, change the factory
(or default) code for a safer one.
Nectra
for operator 1.
for operator 2.
.
.
.
for operator 7.
for C.I.T. operator.
Orange light
*
and repeat the operations.
34
Green light
X2
X2
X2