Victron energy Phoenix Inverter Compact C12/1600 230V Manuel page 15

5.5.2 Configuration examples
Example 1 is the factory setting (since factory settings are entered by computer, all DIP
switches of a new product are set to 'off', except for DS-2).
DS-1 Panel option
DS-2 Panel option
DS-3 Not used
DS-4 Not used
DS-5 Frequency
DS-6 Search mode
DS-7 Not used
DS-8 Store setting
Example 1: (factory setting)
1 No panel connected
2 No panel connected
5 Frequency: 50Hz
6 Search mode off
8 store setting: off→ on→ off
Store the settings (DS3-DS7) by changing switch ds-8 from off to on, and then back to off.
The LED's 'Inverter' and 'eco mode' and 'alarm' will flash four times to indicate
acceptance of the settings.
off DS-1
on DS-2
DS-3
DS-4
off DS-5
off DS-6
DS-7
→ ← DS-8
Example 2
1
2
5
6
8 store setting: off→ on→ off
off
on
on
off
→ ←
No panel connected
No panel connected
Frequency: 60Hz
Search mode off
DS-1 on
DS-2 off
DS-3
DS-4
DS-5 on
DS-6 on
DS-7
DS-8 → ←
Example 3
1 Panel connected
2 Panel connected
5 Frequency: 60Hz
6 Search mode on
8 store setting: off→ on→ off
13