Publicité
Les langues disponibles
Les langues disponibles
K. Electrovalve Assy
L. flame steady plate
M. oil nozzle
Description of working principles：
Open the fuel cap to add kerosene/diesel in the tank. put on the fuel cap and plug the power cord in
the socket. Turn the power switch on to position "1", motor start working and the digital temperature
display light up at this time. The left display window is setting temperature and right one is room
temperature. It would ignite automatically when the setting temperature is higher than room. It begins
to work, the spark plug ignites. This heater is equipped with an electric air pump that forces air through
the air line connected to the fuel intake and then through a nozzle in the burner head. When the air
passes in front of the fuel intake it causes fuel to rise from the tank and into the burner nozzle. This
fuel and air mixture is then sprayed into the combustion chamber in a fine mist. The air blew by the
fast turning fan blades 1.enters the flame steady plate and the burner, supplies additional oxygen to
the burning and makes the burning more sufficient and takes away the heat from the burner interior to
outside2. enters the heat insulation layer of A, takes away the heat from the insulation layer，so that
the burner surface will not overheats.The spark plug stops working after 12s of sparkling.
2. CLEANING, MAINTENANCE AND STORAGE
Regulary wipe the enclosure using a soft sponge or cloth. For very dirty parts, use a sponge wetted
with lukewarm water and a mild detergent, then dry using a clean cloth.
Keep air inlet and fan free from dust and dirt. To clean inner parts, gently blow compressed air through
air inlet.
Regularly inspect the power cable: if worn, cracked or damaged have it replaced by technical service.
Before storing the heater, make sure it is perfectly cool and dry. Cover the unit with a plastic bag, put it
in its packing box and store it in a dry, ventilated place.
heater cool down for at least 15 minutes.
or repair, contact a qualified technician.
repaired it.
When cleaning, make sure that water does not enter the unit.
into the heater.
to clean the heater.
Before starting any maintenance task, shut down, unplug and let the
Do not attempt any electrical repair yourself. If the heater needs service
Do not use a faulty unit unless a qualified technician has inspected and
Do not open the enclosure to clean the inner parts. Do not spray water
Never use solvents, gasoline, toluene and similar aggressive chemicals
49
Publicité
