Publicité
Les langues disponibles
Les langues disponibles
If heater does not start, turn power switch to "0" and then to "1" position. if the heater still does not start
after three times please contact your dealer.
Attention： while the heater is operating, never let the floor ground overheats to prevent causing fire.
Flameout
◆
Pay attention
1、when you shut off the heater, make sure the flame is out before you left the appliance.
2、Put the power switch to position"0" waitting fan stop working and the indicator extinguishes, then
remove the plug from the socket.
safety device
◆
Flame-out protection：Utilizes a photocell to monitor the flame in burn chamber during normal
operation.The photosensitive resistor will become infinite big , cut off Electrovalve Assy ,will stop offer
oil automatic , the fan will working 90s then cut off the power .
Electrical power breakdown protection：when the power breaks down the heater stops working
without the plug being removed from the socket . When the power is recovered, the indicator will light
but the heater will not work. Please press the power switch to start up the heater.
Working principles
A．Combustion chamber
B. spark plug
C. fan blade
D. motor
E. pump
F. air intake filter
G. air output filter
H. fuel tank
I. controller
J. air inlet pipe
48
Publicité
