ARDES AR4C05T Mode D'emploi page 15

SUPPORT ASSEMBLY
Turn the appliance over, rest the plastic supports (5) in place matching
the holes with those on the appliance. Then fix the supports with the 4
screws provided.
The appliance can emit
appliance setting.
Before connecting or disconnecting the appliance, make sure that
function switch (1) and Turbo function pushbutton (2) are in the OFF
position.
To turn the appliance on, insert the plug in the power outlet, set the
operation switch (1) in the desired position and turn the thermostat (3)
clockwise to the maximum position.
To activate Turbo Function push the button (2) on the appliance: it will
help to spread the heat faster. To deactivate Turbo Function push again
this button.
Once the desired room temperature is reached, turn the handle slowly, in
a counter clockwise direction, until the appliance is turned off.
At this point, the product will automatically restart when the temperature
in the room goes below the set limit.
The appliance is also equipped with a daily timer (4C05T only) that allows
the user to set the automatic turn-on and turn-off of the appliance.
Before replacing the appliance in its package, make sure it has cooled
sufficiently.
OPERATION
(AR4C05T only)
To operate
continually, position the TIMER
switch (1) on "I", while for
programmed operation it has to
be positioned on "CLOCK".
The TIMER works only if the
plug is inserted in the power
outlet.
To program
position the
the current time and select the teeth (3) (pushing them outwards)
corresponding to the period in which you want the appliance to operate.
Make sure that the appliance has cooled down completely before storing
it in the box.
Instructions for use
both cool air as well as hot air, depending on the
WITH TIMER
the appliance
the appliance,
arrow (2) on
1
2
GB
3
15