Italiana Camini IDRO 30 Installation, Usage Et Maintenance page 15

Dear Sir / Madam,
Thank you for having chosen IDRO 30.
You are kindly asked to read through this information booklet before using the fireplace in order for you to make use of all its
features in total safety.
For further clarification or assistance, please contact the Dealer.
Please note that a qualified dealer MUST install the fireplace as is stipulated in the Italian Ministerial Decree No. 37 ex Italian Law
No. 46/90.
For installations implemented outside Italy, please refer to the local regulations in the country of use. The manufacturer cannot be
held liable for any damage caused as a result of incorrect installation, incorrect maintenance procedures and improper use.
IMPORTANT WARNINGS:
The thermo fireplace must never function without water in the system.
It can be damaged if it is ignited with no water in the system.
• The thermo fireplace is designed to heat water by means of automatic combustion of wood in the hearth.
• The only hazards that can derive from using the thermo fireplace pertain to non-compliance with the installation regulations,
direct contact with live electrical parts (external), contact made with the fire and hot parts or foreign substances being put in the
fireplace.
• No flammable products are to be used to clean the smoke channel.
• The hearth must only be cleaned with a vacuum cleaner when COLD.
• The glass can be cleaned when COLD with a suitable product (e.g. GlassKamin) and a cloth. Do not clean when hot.
• The exhaust pipes and the door become very hot when the thermo fireplace is used.
• Do not place anything, which is not heat resistant close to the thermo fireplace.
• NEVER use liquid fuel to ignite the thermo fireplace or to rekindle the embers.
• Do not obstruct the air inlets in the room where the fireplace is installed or the air inlets of the thermo fireplace itself.
• Do not wet the thermo fireplace and do not go near electrical parts with wet hands.
• Do not use reducers on the smoke exhaust pipes.
• The thermo fireplace must be installed in a place which is suitable for fire prevention and equipped with all that is required (power
and air inlets/outlets) for it to function properly and safely (refer to the indications given in these technical specifications).
WARNING:
In the list of parts, a code number is given and this must be quoted if a request for spare parts is made.
Declaration of conformity
The undersigned EDILKAMIN S.p.a. with head office headquarters at Via Vincenzo Monti 47 - 20122 Milano - Italy - VAT IT00192220192
Declares under its own responsability as follows:
The wood Thermo Fireplaces specified below is in accordance with the 89/106/EEC (Construction Products)
THE WOOD THERMO FIREPLACES, trademark ITALIANA CAMINI, called IDRO 30
YEAR OF MANUFACTURE: Ref. Data nameplate
SERIAL NUMBER: Ref. Data nameplate
The compliance with the 89/106/EEC directive is besides determined by the compliance with the European standard:
UNI EN 13229:2006
Also declares as follows:
The wood Thermo Fireplaces IDRO 30 is in compliance with the requirements of the European directives:
2006/95/EEC - Low voltage directive
2004/108/EEC - Electromagnetic compatibility directive
EDILKAMIN S.p.a. will decline all responsability of malfunctioning or damage to the equipment in case of unauthorized substitution, assembly or
modifications of any sort on the said equipment on the part of non-EDILKAMIN personnel.
15