Publicité
Les langues disponibles
Les langues disponibles
Spool
cover
3. Put the cutting line through the hole. Push the cutting line
until it exits the opposite hole.
Hole
4. Pull the cutting line through until there is an equal
quantity of cutting line on each side.
5. Turn the spool cap counterclockwise to wind the cutting
line into the trimmer head. Keep approximately 5 in of
cutting line on each side of the trimmer head.
English
11
Remove the battery pack from the machine before
transportation and storage.
11.1
When you move the machine, you must:
Bump
head
•
Stop the machine.
•
Remove the battery pack.
11.2
•
Remove the battery pack from the machine.
•
Make sure that children cannot come near the machine.
•
Keep the machine away from corrosive agents such as
garden chemicals and de-icing salts.
•
Secure the machine during transportion to prevent
damage or injury. Clean and examine the machine for any
damage.
12
Type
Motor
No load speed
Cutting line diameter
Cutting path diameter
Feed Type
Weight (without battery
pack)
Battery model
Charger model
The recommended ambient temperature range:
Item
String trimmer storage tem-
perature range
String trimmer operation
temperature range
Battery charging temperature
range
Charger operation tempera-
ture range
11
TRANSPORTATION AND
STORAGE
WARNING
MOVE THE MACHINE
STORE THE MACHINE
TECHNICAL DATA
Cordless, battery powered
60V
6000 / 5000 (±10%) RPM
0.095" / 0.080" (2.4 mm /
2.0 mm)
14 in. /16 in. (35.6 cm / 40.6
cm)
Bump Feed
7.9 lbs (3.6 kg)
2908302CT and other BAC
series
CAC801 and other CAC ser-
ies
Temperature
32°F (0°C) - 113°F (45°C)
32°F (0°C) - 113°F (45°C)
39°F (4°C) - 104°F (40°C)
39°F (4°C) - 104°F (40°C)
EN
Publicité
