Settings > Vacation; Settings > Fan - EcoNet UETST700SYS Guide D'utilisation

Settings (con't)
Settings
68 80 80
Resume Schedule Away
75 75 71
Basic Time Humidity
Away Home
Vacation
Away Fan
72 65
OFF
BACK
Vacation Settings
80 68 80
65º 85º Auto
Resume Schedule Away
71 75 75
Start: 02:00 pm Jan. 29 2018
Home Away End: 02:30 pm Feb. 10 2018
Vacation Yes Water Yes
Heater
72 65
OFF
BACK
80 80 80 68
Resume Schedule Vacation Away
71 75 75 77
Away Home Away
65 72 64
OFF
Settings
80 68 80
Resume Schedule Away
75 75 71
Basic Time Humidity
Away Home
Away Vacation Fan
72 65
OFF
BACK
Fan Settings
80 80 68
Resume Schedule Away
71 75 75
Fan Speed Override: Med. Lo
Home Away
65 72
OFF
BACK
> Return to Table of Contents
Vacation (Menu > Settings > Vacation)
Zone 3
The Vacation screen allows you to preschedule desired heating, cooling and fan
settings when you are going to be away for an extended time.
47% 44% 44%
To schedule your vacation, select the time, month, day and year and then use the
up and down arrows to set desired start and end dates.
Dining Room
Installer
Note: You will need to set the vacation end time and date before you can set its start.
If you have an EcoNet Zoning System each zone will follow the configured
'Away' settings during 'Vacation' events. To customize the Away / Vacation settings
from the Zone Control unit, tap Menu > Away. This will allow you to set unique
'Vacation' setting for a particular zone. Refer to pg.17 to enable your Zoning System.
Select each set point and fan speed and then use the up down arrows to set to
Zone 3
your desired vacation conditions. We recommend setting the fan speed
to Auto.
47% 44% 44%
Dining Room
Vacation Activated – A Vacation will be indicated by the word 'Vacation'
Zone 3
!
above the current temperature on the home screen and an active Away button.
Tap Vacation on the home screen to cancel and resume schedule or return to
previous settings.
44% 47% 44% 36%
Your HVAC equipment will automatically follow a vacation event. If you have a
Dining Room
connected water heater, you have the option to have your water heater follow the
vacation event; simply toggle the button to Yes.
Fan (Menu > Settings > Fan)
Zone 3
Continuous Fan - Chose from one of 5 speeds to run continuous fan. This
setting allows the fan to continue circulating air in between calls for heating or
47% 44% 44%
cooling. If the system is following a schedule the fan speed presented will match
the speed set in your schedule. You can temporarily override the scheduled fan
Dining Room Installer
speed here. You will notice the copy on screen changes to 'Fan Speed Override'.
The override will follow the 'Schedule Override Time' set in Basic Settings.
Zone 3
44% 47% 44%
Dining Room
EcoNet Smart Thermostat User Guide
®
16