Mitsubishi Electric TRANE TPKA0A 1LA Serie Manuel D'utilisation page 10

4. Emergency Operation for Wireless Remote-controller
en
9
When the remote controller cannot be used
When the batteries of the remote controller run out or the remote controller
malfunctions, the emergency operation can be done using the emergency
buttons on the grille.
A STANDBY lamp
B OPERATING lamp
C Emergency operation cooling switch
D Emergency operation heating switch
E Receiver
C D
Starting operation
• To operate the cooling mode, press the
• To operate the heating mode, press the
• Lighting of the OPERATING lamp B means the start of operation.
[Heat pump type]
B
A
[Cooling Only type]
E
Operation Monitor Display
STOP
COOL
HEAT
Turning off
* Operation details at the time of emergency operation are as shown below.
Note that over the first 30 minutes or so, the temperature adjustment will
not function and the unit will be in continuous operation with the fan on
high.
Airflow Direction Up and Down
Cooling Heating
Cooling Stop
GREEN ORANGE
The display will appear orange for 5
seconds following the switch operation
as indicated at the left, and then it will
return to the regular display.
Lighting
Operation Mode
Set Temperature 24°C, 75°F
Fan Speed
Step 1
button C for more than 2 seconds.
button D for more than 2 seconds.
Stop
COOL HEAT
24°C, 75°F
High High
Step 5