Publicité
Les langues disponibles
Les langues disponibles
5. Press the bond button four times to put Soul Sub into swing mode. The LED will be lit bright
red.
4.5
USING THE SKAA BOND BUTTON
Single-Click
Double-Click
Hold
4-Click
6-Click
4.6
PLAYING AUDIO FROM A PHONE OR TABLET DEVICE
1.
Insert a SKAA transmitter into your smart device.
2. Open the SKAA "cmd" app.
3. Start playing audio on the device. At this point, the device is transmitting audio via the SKAA
transmitter.
4. If the SKAA transmitter is the only one transmitting and it has been added to the green list,
then you will hear your audio playing.
5. If the SKAA transmitter has not added to the green list, follow the instructions in previous
sections to add your SKAA transmitter to the green list.
6. If the SKAA transmitter is not the only one transmitting and your Soul Sub is playing audio
from another source, follow the instructions ahead to hear audio from a different SKAA trans-
mitter.
4.7
PLAYING AUDIO FROM A MAC
1.
Insert the Ursula (USB) SKAA transmitter into the Mac's USB port.
2. Play some audio on the device.
3. Click the Apple in the top left corner of the screen and choose "System Preferences".
4. Click on "Sound".
5. In the Sound settings screen, click the "Output" tab.
6. Select "SKAA Transmitter" from the list of audio output devices.
7. Adjust the volume to desired level.
8. Play an audio file on your Mac and follow the green list process in Section 4.9 to add this Ur-
sula SKAA transmitter to the green list.
9. After you add Ursula to the green list, press the bond button four times to return Soul Sub
into swing mode.
4.8
PLAYING AUDIO FROM A WINDOWS PC
1.
Insert the Ursula (USB) SKAA transmitter into the Windows device. It will automatically install
the required drivers and enable wireless audio transmission.
2. Play some audio on the device.
3. Adjust the volume on the device to desired level.
Playing or waiting to play from a SKAA
transmitter on the green list.
Playing or waiting to play from a SKAA
transmitter that has not yet been added to
the green list.
Add or remove a SKAA transmitter from
the green list by pressing and holding the
bond button for 4 seconds.
*RECOMMENDED: swing mode to play from
any green-listed SKAA transmitter without
manually pressing bond button each time.
Clear the green list and reset volume set-
tings.
Amber (dim) = waiting
Amber (bright) = playing
Green (dim) = waiting
Green (bright) = playing
Amber to Green = added Fa-
vorite
Red (flash) = deleted
Red (dim) = waiting
Red (bright) = playing
Red (flash) = list reset
8
Publicité
