Publicité
Les langues disponibles
Les langues disponibles
status indicator will flash red, Soul Sub's green list will be cleared, and volume settings reset. This
lets you add new SKAA transmitters to the green list.
4.13 USE WITH OTHER LEVVEN AUDIO RECEIVERS
Soul Sub works well with other Levven Audio products like Soul Bar, Soul Play, AR5, and RE1. Re-
view the possible speaker combinations on the levven.com web site.
5.
TROUBLESHOOTING
Issues in audio systems most often stem from poor or wrong connections, or improper control settings.
If you encounter problems, isolate the area of difficulty, check the control settings, determine the cause
of the fault and make the necessary changes. If you are unable to get sound from Soul Sub, review the
following conditions:
5.1
STANDBY LED IS NOT ON
No main power to Soul Sub. Check AC power connections at the amplifier and the AC outlet.
5.2
NO SOUND
If the product is getting AC power, but is producing no sound, check the Power LED. If Soul Sub's
SKAA Bond LED is dim, it means that Soul Sub is seeking connection. Check the following condi-
tions,
• Is Soul Sub bonded to a wireless streaming device?
• Is the streaming device turned on?
• Is audio playing on the wireless streaming device?
• Is the streaming device on mute?
• Is the volume on the streaming device set too low?
• Is audio playing on the wired device?
• Is the volume on the wired device set too low?
Note: Soul Sub allows only one connection at a given time to play music. If a device is already
bonded with Soul Sub and you are trying to play music from another source, disconnect the de-
vice which is currently bonded with Soul Sub before bonding the desired device with Soul Sub to
play music.
If the SKAA Bond LED is on bright solid, it means Soul Sub has successfully bonded with a device.
Check all connections and control settings on associated components.
5.3
TROUBLE WITH SKAA
https://skaa.com/tlc can help you on issues with SKAA receivers, troubleshooting, SKAA transmit-
ters, and the SKAA "cmd" app.
6.
SPECIFICATIONS
Peak Output Power
Continuous Output Power
Frequency Response
Impedance
Woofer Diameter
Input Power Requirements
Max Current Consumption
110 watts
96 watts
40 to 160 Hz
4 ohms
210 mm
100V-240 VAC 50/60 Hz
1 A
10
Publicité
