Levven Audio Soul Sub LA-SB100 Instructions De Fonctionnement page 4

3.3.1
Crossover Frequency and
SKAA Bond
Phase Button
LED
Gear
Power
3.3.2 POWER BUTTON
Button
LED
Crossover Frequency and
3.3.3 SKAA BOND LED
Phase Button
3.3.4 SKAA BOND BUTTON
LED
3.3.5 VOLUME UP (+) BUTTON
Gear SKAA Bond
Button
Crossover Frequency and
Phase Button
3.3.6 VOLUME DOWN (-) BUTTON
Volume -
Button
Crossover Frequency and
Phase Button
3.3.7 CROSSOVER FREQUENCY AND PHASE BUTTON
LED
SKAA Bond
Button
SKAA Bond
Button
Crossover Frequency and
Phase Button
POWER LED
The power LED indicator will be lit bright red when Soul Sub is powered on and active.
When this LED is off, it indicates Soul Sub is powered off.
When the power LED is a dim red, Soul Sub is in low-power standby mode.
Crossover Frequency and
SKAA Bond
Button
Press and hold this button to power off Soul Sub. Click this button to wake Soul Sub from
off or standby state.
This dual-color red/green LED indicates several states of the SKAA wireless audio receiver.
See section 4.5 for more details.
This button allows several interactions with the SKAA wireless audio receiver. See section
4.5 for more details.
Button
Click this button to increase Soul Sub's volume.
Volume +
Button
Click this button to decrease Soul Sub's volume.
Crossover Frequency and
Volume - Volume +
Button
Click this button to adjust the crossover frequency. One button click will cycle the cross-
over selection to the next frequency setting.
A lower frequency setting will send fewer high frequencies through the subwoofer. This
adjustment allows you to tailor the sound to fit the room where Soul Sub is installed.
Press and hold this button to adjust the phase of the subwoofer.
Volume - Volume +
Button
Volume -
Phase LEDs
Button
Crossover Frequency and
Phase LEDs
Volume - Volume +
Button Button
Crossover Frequency and
Phase LEDs
Phase LEDs
Button
Button
Crossover Frequency and
Phase LEDs
Volume +
Button
4