Velleman CAMCOLBUL35 Mode D'emploi page 5

In the OSD menu:

NEXT/BACK: select this option and press the button to go to the next/previous page of options in the
menu.

RETURN: select this option and press the button to return to the previous level in the menu.

EXIT: select this option and press the button to leave the OSD menu without saving the settings.

SAVE&EXIT: select this option and press the button to save all settings.

LOAD DEFAULT: select this option and press the middle button to reset the camera to the factory
defaults.

SOFT VERSION: displays the version number of the camera software.
The OSD menu settings are described in detail below.
7.2 Noise Reduction
Use this function to switch 3D noise reduction on or off.
Menu: IMAGE > 3D-NR
Select ON to activate 3D noise reduction; select OFF to deactivate.
7.3 Automatic Exposure
Use this function to set the exposure method.
Menu: IMAGE > AE MODE

GLOBAL: use the global image to define exposure.

CENTER: use the centre of the image to define exposure.

CENTER WEIGHT: use the global image, but assign more importance to the centre of the image and
less importance to the edges.

BACK LIGHT: back light compensation. If there is a bright light in the background, for example from
a window, the image around it may be too dim to see clearly. In that case, use the backlight
function to compensate. The camera automatically brightens the dim parts of the image.

FRONT LIGHT: front light compensation. Use this setting when there is a bright light illuminating the
front of the image.

DISTINGUISH: for advanced automatic exposure.
7.4 Image Enhancement
These are common adjustments for video images: sharpness, contrast, and saturation.
Menu: IMAGE > IMAGE ENHANCE
SHARPNESS Use this option to adjust the sharpness of edges and details in the image.
DETAIL: use this option to adjust the sharpness of details in more uniform areas of
the image.


EDGE: use this option to adjust the sharpness of edges in the image.


CONTRAST Use this option to enhance the image contrast.



SATURATION Use this function to adjust the colour saturation.


V. 01 – 10/03/2014
AUTO: for automatic adjustment.
MANUAL: for manual adjustment (0–15).
AUTO: for automatic adjustment.
MANUAL: for manual adjustment (0–15).
AUTO: for automatic adjustment.
MANUAL: for manual adjustment (0–15).
GAIN MAP: advanced contrast adjustment.
AUTO: for automatic adjustment.
MANUAL: for manual adjustment (0–15).
CAMCOLBUL35
5 ©Velleman nv