Nuna triv next Mode D'emploi page 25

Accessories
Car Seat Ring Adapter
Use the car seat ring adapter only with a Nuna PIPA
infant carrier in combination with a Nuna TRIV
See PIPA
™
infant carrier.
1
- To attach the car seat ring adapter, place the ring
adapter on the seat mount. A "click" sound means the
ring adapter is attached.
2
- To attach the infant carrier, place the infant carrier on the
ring adapter. A "click" sound means the infant carrier is
attached.
Pull up on the infant carrier to check that it is securely
attached to the adapter and that the adapter is securely
attached to the stroller.
3
- The ring adapter can be attached so that the infant
carrier is rear facing or forward facing.
4
- To remove the infant carrier, squeeze the release button
located on the back of the infant carrier (1) and lift up (2).
Remove the infant carrier before folding.
5
- To fold the stroller with the ring adapter attached, pull
the adapter fold strap.
6
- To remove the ring adapter (with the stroller unfolded),
push the adapter release buttons (1) and lift the adapter
up (2).
24
TRIV next instructions
™
series instruction manual for proper usage of the
series
™
next stroller.
™