Bavaria BBC 52 Mode D'emploi D'origine page 18

within 5 work days after purchasing the article and
upon presentation of a valid bill of purchase. Also,
refer to the warranty table in the service informati-
on at the end of the operating instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
present).
•
Check to see if all the items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, keep the packaging until the end
of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, plastic sheets and small parts. There is
a risk of choking and suff ocating!
•
Engine assembly
•
Long handle assembly
•
Steady grip on the left
•
Harness
•
Line spool with cutting line
•
Thread cutter
•
2x cable tie
•
Slotted screwdriver
•
Spark plug wrench
•
Allen key size 5 mm
•
Allen key size 4 mm
•
Oil/petrol mixing bottle
•
Cutting line guard
•
Top part of steady grip holder
•
Cutting blade guard hood
•
Cutting blade
•
4x Allen screw M6x30, spring washer, washer
•
4x Allen screw M5x25, spring washer, washer
•
2x hex screw M6x16
•
3x line cutter fastening screw (L = 10mm)
•
Original Operating Instructions
•
Safety information
3. Proper use
The power scythe (using the cutting blade) is
designed for cutting young trees, strong weeds
and undergrowth. The power trimmer (using the
line spool with cutting line) is designed for cutting
lawns, grassed areas and small weeds. The ope-
rating instructions as supplied by the manufactu-
rer must be obeyed to ensure that the equipment
Anl_BBC_52_SPK7.indb 18 Anl_BBC_52_SPK7.indb 18
GB
is used properly. Any use which is not expressly
permitted in the manual may result in damage
to the equipment and place the user in serious
danger. Be sure to observe the restrictions in the
safety instructions.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
equipment is used in commercial, trade or indust-
rial businesses or for equivalent purposes.
Important. Due to the high risk of bodily injury
to the user, the petrol power scythe must not be
used to carry out the following work: to clean dirt
and debris off walkways, or to chop up tree or
hedge clippings. Similarly, the petrol power scythe
must not be used to level out high areas such as
molehills. For safety reasons, the petrol power
scythe must not be used as a drive unit for other
work tools or toolkits of any kind.
The equipment is allowed to be used only for its
prescribed purpose. Any other use is deemed to
be a case of misuse. The user/operator and not
the manufacturer will be liable for any damage or
injuries of any kind resulting from such misuse.
4. Technical data
Engine type .. 2-stroke engine, air-cooled, chrome
cylinder
Engine power (max.) ............. 1.65 kW / (2.2 HP)
Displacement ............................................ 52 cm
Engine idling speed .............................3000 min
Max. engine speed.............................10000 min
Max. scythe speed: ..............................7500 min
Trimmer: ...............................................6600 min
Ignition .................................................Electronic
Drive ........................................Centrifugal clutch
Weight (empty tank) ....................................7.4 kg
Cutting circle Ø of line .................................45 cm
Cutting circle Ø of blade ...........................25.5 cm
Line length .................................................. 2.5 m
Line Ø ...................................................... 2.4 mm
Tank capacity ................................................ 1.1 l
Spark plug .........................................Vistar L7TC
- 18 -
3
-1
-1
-1
-1
13.01.16 08:31 13.01.16 08:31