Télécharger Imprimer la page

Worx WX508L Mode D'emploi page 7

Publicité

Les langues disponibles

Les langues disponibles

correct power tool for your application.
The correct power tool will do the job better
and safer at the rate for which it was designed.
b) Do not use the power tool if the switch
does not turn it on and off. Any power tool
that cannot be controlled with the switch is
dangerous and must be repaired.
c) Disconnect the plug from the power
source and/or the battery pack from
the power tool before making any
adjustments, changing accessories, or
storing power tools. Such preventive safety
measures reduce the risk of starting the power
tool accidentally.
d) Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
e) Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any other
condition that may affect the power tool`s
operation. If damaged, have the power
tool repaired before use. Many accidents
are caused by poorly maintained power tools.
f)
Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
g) Use the power tool, accessories and
tool bits etc., in accordance with
these instructions and in the manner
intended for the particular type of power
tool, taking into account the working
conditions and the work to be performed.
Use of the power tool for operations different
from those intended could result in a hazardous
situation.
5. BATTERY TOOL USE AND CARE
a) Recharge only with the charger specified
by the manufacturer. A charger that is
suitable for one type of battery pack may
create a risk of fire when used with another
battery pack.
b) Use power tools only with specifically
designated battery packs. Use of any other
battery packs may create a risk of injury and fire.
c) When battery pack is not in use, keep it
away from other metal objects, like paper
clips, coins, keys, nails, screws or other
small metal objects, that can make a
connection from one terminal to another.
Shorting the battery terminals together may
cause burns or a fire.
d) Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
battery may cause irritation or burns.
Cordless Reciprocating Saw
All manuals and user guides at all-guides.com
6. SERVICE
a) Have your power tool serviced by
RECIPROCATING SAW
SAFETY WARNINGS
1. Hold reciprocating saw by insulated
2. Use clamps or another practical way to
ADDITIONAL
SAFETY RULES FOR
RECIPROCATING SAW
1. Always wear a dust mask.
BATTERY PACK SAFETY
WARNINGS
1) WARNING: Risk of fire and burns. Do not
2) Dispose of used battery promptly.. When
3) Keep battery out of reach of children and
4) Never put batteries in mouth. If
5) CAUTION – The battery used in this
6) Warning: Do not use a visibly damaged
7) Warning: Do not modify or attempt to
a qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power tool is
maintained.
gripping surfaces, when performing an
operation where the cutting accessory
may contact hidden wiring .Cutting
accessory contacting a "live" wire may make
exposed metal parts of the power tool "live"
and could give the operator an electric shock.
secure and support the workpiece to a
stable platform. Holding the work by hand or
against your body leaves it unstable and may
lead to loss of control.
disassemble, heat above 100°C (212°F),
or incinerate. Do not expose cells or
batteries to heat or fire. Avoid storage in
direct sunlight.
disposing of secondary cells or batteries,
keep cells or batteries of different
electrochemical systems separate from
each other.
in original package until ready to use.
swallowed, contact your physician or
local poison control center.
device may present a risk of fire or
chemical burn if mistreated. Replace
battery with WORX only. Use of another
battery may present a risk of fire or
explosion.
battery pack or appliance as applicable.
repair the appliance or the battery pack
7
EN

Publicité

loading

Ce manuel est également adapté pour:

Wx508l.9