Husqvarna 122HD45 Manuel D'utilisation page 15

Blade
Problem
The blade becomes hot.
Transportation and storage
• Always allow the product to cool down before
storage.
• For storage and transportation of the product and
fuel, make sure that there are no leaks or fumes.
Sparks or open flames, for example from electrical
devices or boilers, can start a fire.
• Always use approved containers for storage and
transportation of fuel.
• Empty the fuel before transportation or before long-
term storage. Discard the fuel at an applicable
disposal location.
Technical data
Engine
Cylinder displacement, cu.in/cm
Idle speed, rpm
Recommended max speed, rpm
Maximum engine power acc. to ISO 8893, kW/hp @ rpm
Catalytic converter muffler
Speed-regulated ignition system
Emissions Durability Period according to California Air
Resources Board, h
Ignition system
Spark plug
Electrode gap, in/mm
Fuel
Fuel tank capacity, US Pint/l
Weight
Without fuel, lb/kg
2229 - 001 - 25.07.2023
Possible causes
There is friction between
the blades.
Transportation, storage and disposal
Technical data
3
Recommended step
Remove burrs from the blade and lubricate the blade.
To examine the blades on page 13 .
Refer to
• Attach the transport guard during transportation and
storage.
• Remove the spark plug cap from the spark plug.
• Attach the product during transportation. Make sure
that it cannot move.
• Clean and do servicing on the product before long-
term storage.
122HD45
1.32/21.7
2900
9000
0.6/0.8 @ 7800
Yes
Yes
50
HQT-4 672201
0.02/0.5
0.6/0.3
10.4/4.7
122HD60
1.32/21.7
2900
9000
0.6/0.8 @ 7800
Yes
Yes
50
HQT-4 672201
0.02/0.5
0.6/0.3
10.8/4.9
15