Eco-Flo EFWIFI33 Manuel Du Propriétaire page 6

INSTALLATION
4. Install the ECO-FLO app from the Android
or iOS App Store and follow the setup
instructions in the app.
5. During setup, you will be prompted to scan
the bar code or manually enter the MAC
address found on the label on the back of
the controller (Fig. 2). After this step, you
may install the controller back on the screws
already in the wall.
6. Continue to follow instructions in the app
until setup is complete. The instructions
within the app will guide you through the
following steps:
a. Enter your personal information
b. Connect controller to phone or tablet
c. Connect controller to home Wi-Fi net
work
7. After setup of primary device is complete,
you may add additional devices if you wish
for multiple devices to receive push
notifications about pump status.
6
MAC Address
and Bar Code
Fig. 2