LEGRAND MP2.10-MP4.10 Manuel D'instructions page 63

Protection unit MP2.10
6. Integrated measurement function
(only for reference 0 283 01)
The parameters of the measurement functions cannot be shown on the display of the MP2.10. To access to
the measurement functions with MP2.10 it's necessary connect the device with supervision system (see EMS
guide) or connect locally to the USB port with PC (Power Control Station software) or BLE dongle (EnerUp +
Project app).
The flow of the current (and active power/energy) can only be set with the EMS configurator software. To
connect MP2.10 with EMS system, it's necessary set the address from 0 to 9 using the navigation knob,
select the ADR menu and enter the default numerical address 1.
With address 0 the EMS system is not active.
63