Euroflex Monster EZ1 Manuel D'utilisation page 8

All manuals and user guides at all-guides.com
D. Filling Boiler with Water
WARNINGS:
Carefully read all instructions before removing Boiler Cap.
•
Always unplug appliance before filling the Boiler.
•
*IMPORTANT*
Use tap water – distilled or demineralized water if tap water is too
hard. DO NOT add detergents, perfumes, oils or other chemical
substances.
Follow these instructions to avoid overfilling the
Boiler.
• Be sure appliance is unplugged, and has
cooled for at least 10 minutes before filling
with water.
• Make sure Handle Assembly is in the
upright "Off" position. Remove Boiler Cap
by pressing it down and turning it counter-
clockwise.
• Pour in a maximum of 0.6 l / 20 oz. water
using the provided measuring cup. Make
sure that water does not overflow. Replace
Boiler Cap by pressing it down and turning
it clockwise. If using cold water, heating
time is about 3-5 minutes. If using warm
water, heating time is reduced.
*IMPORTANT*
If re-filling the Boiler while Steamer has been in use, be sure to
allow Steamer to cool for at least 10 minutes and loosen Boiler
Cap slowly to allow any excess steam to escape before com-
pletely removing Cap. (See step 2D, "Refilling Boiler During Use"
for detailed instructions.)
8
Before Use