Euroflex Monster EZ1 Manuel D'utilisation page 7

All manuals and user guides at all-guides.com
C. Attach Hard Surface Floor or Carpet Pad to Steamer
Affix either the Hard Surface Floor Pad or Carpet Glide with
Carpet Pad to your Floor Steamer.
WARNING: To prevent floor damage, ALWAYS attach either the
HARD SURFACE FLOOR PAD or the CARPET GLIDE ACCESSORY
with CARPET PAD when using your Floor Steamer. NEVER use
without either of these attachments affixed to the machine.
ATTACHING HARD SURFACE FLOOR PAD
Place Floor Pad face down on the floor, wide
side forward, with white hook and loop strips
facing up. Hold Floor Steamer about 2"
above Pad and gently place Floor Steamer
onto the Pad. Firmly press down to assure
Pad is securely adhered to the Floor Steamer.
ATTACHING CARPET GLIDE WITH CARPET PAD
Place Carpet Glide face up on floor. Center
and place Carpet Pad on top of Carpet
Glide, wide side forward, with white hook
and loop strips facing up. Hold Floor Steamer
about 2" above Pad and gently place Floor
Steamer onto the Pad. Firmly press down to
assure Pad is adhered to the Floor Steamer
and Carpet Glide is securely attached.
USE ON HARDWOOD FLOORS
For hardwood floors, use only on "sealed"
hardwood surfaces. Carefully control the
amount of steam used when cleaning, as too
much water could cause damage.
IMPORTANT NOTE ABOUT LINOLEUM FLOORING
Steam can cause wax to be stripped from, and consequently damage,
some varieties of linoleum flooring. ALWAYS test a small, inconspicuous
portion of the floor BEFORE using steam to ensure that your linoleum
floor does not have this issue.
NOTE: See "Maintenance & Cleaning" for care and cleaning instructions for
Microfiber Pads.
7
Before Use