Publicité
Les langues disponibles
Les langues disponibles
User manual and warranty card
indicator plate is in a horizontal position (Fig. 11B) during the mower's operation, it means that the
basket is full and should be emptied.
THE CUTTING UNIT CABINET
Warning! When the engine is running, the cutting blades rotate.
1. After finishing work, thoroughly clean the entire device.
2. Stop the engine and disconnect the spark plug wire before cleaning the housing.
3. Empty the fuel tank before cleaning.
4. Without tilting the mower to the side, lay it on the ground so that the front wheels are in the air.
5. Clean the underside of the mower with a brush and water.
Do not use high-pressure cleaning devices, as high-pressure water can break the paint protection of
the housing. Do not use intensive cleaning and washing agents, e.g. aggressive detergents, they can
damage plastics and metals, which may result in deterioration of the device's safety.
After connecting the hose to a special quick coupler that is already mounted in the mower housing
and unscrew the water, start the mower. The device is cleaned during the rotation of the knife, on
which a strong stream rinses out flushing residues of grass. (Fig. 12)
MOUNTING THE SIDE DISCHARGE CHUTE
To mount the side discharge chute:
1. open the side ejector cover 18 (Fig. 2) (To unlock the cover, first turn the axle cover (Fig. 14A, B)),
2. push in the side discharge chute 19 (Fig. 2) as shown in the Fig. 14C,
3. rest the side ejection cover on the side discharge chute (Fig. 14D).
GRINDING FUNCTION
Mulching is a care procedure involving the fragmentation of cut grass. The mulching system allows it
to be left completely or partially on the soil, where it decomposes and provides nutrients.
The lawn meets the mulching conditions when the grass is no more than 4 cm. The lawn on which
mulching will be carried out must be mowed regularly and quite often - even every few days. During
mulching, only young and delicate blades can be left on the surface, without damaging the lawn, as
they break down and do not rot.
To start the grinding function, remove the grass catcher and remove the side ejection cover (if fitted),
mount the grass grinding attachment /plug (Fig. 13) to the rear outlet and close the tailflap.
For mulching to be fully effective, you must buy a milling knife.
SIDE EJECTION FUNCTION
To work with the side ejection:
1. remove the grass basket 7 (Fig. 1) (if fitted), insert the mulching plug into the rear outlet opening
(Fig. 13) and close the flap 22 (Fig. 2),
2. lift the side discharge cover and install the side discharge chute with the catches. Note: to raise
the side discharge cover, it may be necessary to use a lot of force or to open a special lock
preventing its automatic opening (if present on your model). (Fig. 14A-C),
3. rest the side discharge cover on the side discharge cover (side discharge duct). (Fig. 14D).
22
English
Publicité
