Publicité
Les langues disponibles
Les langues disponibles
Clevis
Support
Collar
Install the Supports
CAUTION: Risk of product damage. Use care when repositioning the support collars, to avoid
scratching the shelf.
Thread a support rod assembly into each support collar.
Using the coupling nut, adjust the length of the support rod until each clevis reaches a tab on the
underside of the sink.
Secure each clevis to the sink with a bolt, 2 washers, and a nut.
Center each support collar on the shelf and secure with a setscrew.
Using the coupling nuts, tighten each support rod.
1114139-2-A
All manuals and user guides at all-guides.com
Support Rod
View from Underneath
1/2" x 13 Bolt
8
Tab
Coupling Nut
1/2" -13 Nut
1/2" Washer
Kohler Co.
Publicité
