Makita DTP141RTJ Manuel D'instructions page 5

ENGLISH
(Original instructions)
1 Red indicator
2 Button
3 Battery cartridge
4 Star marking
5 Indicator lamps
6 Check button
7 Switch trigger
8 Lamp
9 LED display
10 Lamp button
11 Reversing switch lever
SPECIFICATIONS
Fastening
Capacities
Impact driver
mode
Hammer drill
mode
Drilling Capacities / Concrete
Drilling
Capacities
Drill mode
(Low (1) /
High (2))
Fastening
Screwdriver Capacities
mode (Low (1) /
High (2))
Net weight
Rated voltage
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heaviest combi-
nation, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of resi-
dence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Explanation of general view
12 Speed change lever
13 Mode mark
14 Action mode changing ring
15 Arrow
16 Changed in three steps
17 Hard
18 Medium
19 Soft
20 Control button
21 Battery capacity
22 Bit
Model
Machine screw
Standard bolt
High tensile bolt
–1
No load speed (min )
(Soft / Medium / Hard)
Impacts per minute
(Soft / Medium / Hard)
–1
No load speed (min )
(Low (1) / High (2))
–1
Blows per minute (min
(Low (1) / High (2))
Steel
Wood
No load speed (min
Machine screw
Self drilling screw
No load speed (min
D.C. 14.4 V Model
D.C. 18 V Model
DTP131
0 – 1,400 / 0 – 2,200 /
0 – 2,800
0 – 1,200 / 0 – 2,400 / 0 – 3,200
0 – 700 / 0 – 2,800
)
–1
) 0 – 700 / 0 – 2,800
3.5 mm – 6 mm / 4 mm – 6 mm
4 mm, 5 mm / 4 mm (Thickness 3.2 mm max.)
0 – 300 / 0 – 1,100 (depends on torque setting)
–1
)
1.5 kg – 1.7 kg
D.C. 14.4 V
BL1415N / BL1430 / BL1430B / BL1440 / BL1450 / BL1460B
BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 /
BL1840B / BL1850 / BL1850B / BL1860B
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF
23 Sleeve
24 Bit-piece
25 Groove
26 Hook
27 Screw
28 Standard bolt
29 Fastening torque
30 Fastening time
31 Proper fastening torque
32 High tensile bolt
4 mm – 8 mm
5 mm – 14 mm
5 mm – 12 mm
0 – 1,300 / 0 – 2,200 /
0 – 700 / 0 – 2,700
0 – 8,400 / 0 – 32,400
8 mm
10 mm / 6.5 mm
21 mm / 12 mm
0 – 700 / 0 – 2,700
0 – 600 / 0 – 2,300 (P mode)
1.5 kg – 1.9 kg
DTP141
0 – 2,700
D.C. 18 V
5