Cd/Cd-R/Cd-Rw And Usb Storage Devices; Basic Operations; Displaying Text Information - Pioneer DEH-P6200BT Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Section
02
Operating this unit
Local (local seek tuning)
Local seek tuning lets you tune in to only those radio
stations with sufficiently strong signals for good re-
ception.
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the desired setting.
FM: OFF—Level 1—Level 2—Level 3—Level 4
AM: OFF—Level 1—Level 2
The larger the setting number, the higher the sig-
nal level. The highest level setting allows recep-
tion of only the strongest stations; while lower
settings let you receive progressively weaker sta-
tions.
3 Press M.C. to confirm the selection.
Note
Operation is complete even if the menu is can-
celled before being confirmed.
CD/CD-R/CD-RW and USB
storage devices

Basic Operations

Playing a CD/CD-R/CD-RW
1 Insert the disc into the disc loading slot with the
label side up.
! If a disc has already been inserted, press SRC/
OFF to select the built-in CD player.
Ejecting a CD/CD-R/CD-RW
1 Press h (eject).
Playing songs on a USB storage device
1 Open the USB connector cover.
2 Plug in the USB storage device using a USB
cable.
Stopping playback of files on a USB storage device
1 You may disconnect the USB storage device at
anytime.
Selecting a folder
1 Push M.C. up or down.
Selecting a track
1 Push M.C. left or right.
12
En
Fast forwarding or reversing
1 Push and hold M.C. left or right.
Returning to root folder
1 Press and hold BAND/ESC.
Switching between compressed audio and CD-DA
1 Press BAND/ESC.
Notes
! When playing compressed audio, there is no
sound during fast forward or reverse.
! USB storage device that can be charged via
USB will be recharged when plugged in and
the ignition switch is set to ACC or ON.
! Disconnect USB storage devices from the unit
when not in use.
! If plug and play is on and a USB storage de-
vice is present, depending on the type of de-
vice, the source may switch to USB
automatically when you turn on the engine.
Please change plug and play setting as neces-
sary. Refer to USB PnP (plug and play) on page
21.

Displaying text information

Selecting the desired text information
1 Press
/DISP/SCRL.
CD TEXT discs: Track number and play time—
disc title—disc artist name—track title—track ar-
tist name
WMA/MP3/AAC: Play time—folder name—file
name—track title—artist name—album title—
genre—comment—bit rate—folder and track
numbers
WAV: Play time—folder name—file name—track
title—artist name—album title—genre—com-
ment—sampling frequency—folder and track
numbers
Scrolling the text information to the left
1 Press and hold
/DISP/SCRL.

Publicité

Table des Matières
loading

Table des Matières