Publicité
Les langues disponibles
Les langues disponibles
Seal
here.
12. Final Caulking
IMPORTANT! Carefully follow the caulk or silicone sealant manufacturer's instructions for application
and curing time.
NOTE: Your shower door may not appear exactly as shown. The application of sealant or caulk is the
same.
NOTE: Thoroughly clean and dry all dust, dirt, and grease from the bottom track and shower ledge
surfaces where caulk or sealant will be applied.
Carefully apply caulk or sealant where:
the wall jambs and wall meet inside the shower.
the bottom track and wall jamb meet.
Care and Cleaning
For best results, keep the following in mind when caring for your STERLING product:
Always test your cleaning solution on an inconspicuous area before applying to the entire surface.
Wipe surfaces clean and rinse completely with water immediately after applying cleaner. Rinse and
dry overspray that lands on nearby surfaces.
Do not allow cleaners to sit or soak.
Use a soft, dampened sponge or cloth. Never use an abrasive material such as a brush or scouring
pad to clean surfaces.
Do not use abrasive cleansers or acidic solvents on Vikrell surfaces as they may cause surface
dullness or discoloration.
Sterling
All manuals and user guides at all-guides.com
Inside
of Bath
15
Seal
here.
Seal
here.
1053310-2-D
Publicité
