Uline METRO Serie Instructions De Montage page 3

144 x 48", 192 x 48" TABLES
1. Attach two adjustable glides (A) to the bottom
corners of each leg frame. (See Figure 5)
Figure 5
A
2. Align holes on long support bar with top of center
leg frames. Attach using four M6 x 25 mm bolts (C).
Repeat for remaining long support bar. (See Figure 6)
NOTE: Center leg frames are narrower than
end leg frames.
Figure 6
Long Support Bar
Center
Leg Frame
PAGE 3 OF 15
ASSEMBLY CONTINUED
Leg Frame
C
NOTE: For 192 x 48" table, add an extra center
leg frame and two long support bars during
this step. Attach using 4 M6 x 25 mm bolts (C).
(See Figure 7)
Figure 7
3. Connect center leg frames to end leg frames with
short support bar and five M6 x 25 mm bolts (C).
Repeat for remaining short support bars. (See Figure 8)
IMPORTANT! Step 3 should be followed for both
144 x 48" and 192 x 48" tables.
Figure 8
Short Support Bar
C
C
C
0123 IH-10276