Télécharger Imprimer la page

WORLD DRYER ADVANTAGE Serie Manuel Du Propriétaire page 2

Publicité

Les langues disponibles

Les langues disponibles

DANGER: Disconnect Power Before Servicing
Failure to disconnect the power source before installation or servicing can result in serious injury or death
from electrical shock.
Risk of fire, personal injury or property damage may result from improper installation or service.
WARNING:
WARNING:
Cancer and reproductive harm – www.p65warnings.ca.gov
GENERAL OPERATION
This dryer is activated by an infrared sensor. The dryer operates as long as hands are below nozzle. There is a maximum 35-second running time with a safety
override feature, if hands are not removed. Each component used in your dryer has been designed to provide years of trouble-free service. However, if trouble
should develop, it can normally be located by visual examination. Removal or replacement of most parts is simple and can be done without special tools.
SERVICE AND MAINTENANCE OF YOUR DRYER
IF THE DRYER WON'T TURN ON:
Check electrical service, circuit breaker. Make sure proper
voltage is being supplied to the dryer. Check for loose or
disconnected terminal to sensor. INCREASE sensitivity
(F
1) by using a flat-blade screwdriver and CAREFULLY
igure
turning the adjustment pot located on the sensor
CLOCKWISE 1/3 Turn MAX. If necessary, replace sensor.
IF DRYER WILL NOT SHUT OFF:
Make certain black foam is attached to lens and lens is clean.
If damaged, replace. DECREASE sensitivity (Figure 1) by
using a small flat-blade screwdriver and CAREFULLY turning
the adjustment pot COUNTER-CLOCKWISE 1/3 Turn MAX.
If necessary, replace sensor.
IF COLD AIR IS COMING FROM THE NOZZLE:
Turn off breaker for 30 seconds to reset thermostat. If
required, remove the cover and vent, check the heating
element. If the element is broken or burned out, replace it.
IF NO AIR IS COMING FROM THE NOZZLE AND HEATING
ELEMENT GLOWS:
FOR ANY OTHER PROBLEM, CONTACT FACTORY FOR ASSISTANCE.
CLEANING - DO NOT spray cleaning solvents through dryer vents. DO NOT use abrasive,
chlorinated, or highly alkaline cleaners. DO NOT use oil-based cleaners.
SEMI-ANNUALLY remove the cover and clean all lint and dust from the mechanism, inside of cover, and plastic window.
Clean cover with a mild soap or detergent and warm water, using a soft cloth or sponge.
For service assistance please call (800) 323-0701 or Email custservice@worlddryer.com
All parts are warranted to the original consumer purchaser to be free from defects in material and workmanship for a period of five (5) years
from the date of purchase from manufacturer. All models outside of the U.S.A., one (1) year. We will replace FREE OF CHARGE, during the
warranty period, any warranted part which proves defective in material and/or workmanship under normal installation, use, and service, excluding
normal wear. Replacement parts can be obtained by returning the part, TRANSPORTATION CHARGES PREPAID. You must notify factory prior
to returning part or dryer. Any damage to this dryer as a result of misuse, abuse, neglect, accident, improper installation, unauthorized repairs, or
any other use violative of instructions furnished by us, WILL VOID THIS WARRANTY. THIS LIMITED WARRANTY IS THE SOLE WARRANTY ON
OUR PRODUCTS, AND WE DISCLAIM AND EXCLUDE ANY AND ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. OUR LIABILITY SHALL NOT EXCEED IN ANY EVENT THE
REPLACEMENT OR SALE PRICE OF THE ALLEGEDLY NONCONFORMING PRODUCT AND SHALL EXCLUDE LABOR CHARGES. TO THE
EXTENT PERMITTED BY LAW WE SHALL NOT BE LIABLE FOR ANY LOSS, COST, EXPENSE, OR INCIDENTAL OR CONSEQUENTIAL DAMAGES
OF ANY KIND, WHETHER BASED UPON WARRANTY (EXPRESS OR IMPLIED), CONTRACT, NEGLIGENCE OR STRICT LIABILITY AND ARISING
IN ANY WAY IN CONNECTION WITH THE DESIGN, MANUFACTURE, SALE, USE OR REPAIR OF THE PRODUCT.
F
1 S
igure
Remove the cover and check to see that the fan revolves freely. Check and replace motor, if required.
A
DRYER LIMITED WARRANTY
dvAntAge
A
dvAntAge
World Dryer Corporation
340 County Line Road, Bensenville, IL 60106 U.S.A.
Telephone (800) 323-0701
www.worlddryer.com • Email: custservice@worlddryer.com
Revised April 2019
A
enSitiVity
djuStment
SERIES

Publicité

loading

Ce manuel est également adapté pour:

Ad90Ad90-mAd90-bgAd90-ss