Programming - DIEL MT 200 E Manuel D'instruction

Press simultaneously the keys
few seconds to enter the PROGRAMMING
menu, the message PRG appears, then
parameter F in the first display will indicate
and the configuration in use
Choose the desired configuration by pressing
the UP/DOWN keys choosing between:
• 0: three probes without fan control.
• 1: four probes with fan control.
• 2: four probes without fan control.
• 3: three probes with fan control
• 4: access to the advanced programming
menu.
>> Paragraph ADVANCED

PROGRAMMING

Confirm with
The following values are then proposed, modifiable with the keys
be confirmed with the key
P: PRE-ALARM, default 140
MT 200 E
test function at any time.
PROGRAMMING
.
- 26 -
for a
ENG
, to