Dragon Touch Y88X Guide De Démarrage Rapide page 7

CONNECT TO A BT DEVICE
Turn on BT
You must pair your device with another device before you can transfer files between
them. Under "Settings", tap "Connected devices → Connection preferences → BT
→ ON", the BT indicator then appears in the status bar. It will start searching for
available devices nearby. If you need rescan, tap the menu on the top right corner,
and tap "Pair new device".
Scan Device
After scanning, there will be a list of all available BT devices in range. If the device you
want to pair with isn't in the list, ensure that the other device is turned on and set to
be discoverable.
Pair with BT Device
Tap the name of an available BT device you want to pair with. On the target device
you will get a "BT Pairing Request" dialog. Tap "Pair", it will then show you paired
devices.
9:16 AM
On
Device name
Y88X
Pair new device
When Bluetooth is turned on, your device can communicate with other nearby Bluetooth devices.
11
Device Reset
You may reset your tablet when necessary. For example, you can choose to reset
your tablet if you forgot password or PIN of the tablet. Resetting your tablet will clear
all info in your tablet and restore your device to factory default settings.
WARNING!
If you perform a Hard Reset, all data from your tablet, including your account
configuration, apps, music, pictures, and files, will be deleted. Please remember to
back up any important data before perform a Hard Reset.
OPTIONAL CONNECTIONS
Connecting to a Computer
Connect the tablet to a computer to transfer files.
1. Connect your tablet to the computer.
Connect the included USB cable to your tablet's Micro-USB port and your
computer's USB port.
2. Tap the notification on the tablet.
Swipe down the notifications panel and tap the USB icon.
3. Tap Media Device (MTP).
This allows you to transfer files between your computer and tablet.
12