Horizon Fitness T202 Manuel Du Propriétaire page 12

ASSEMBLY STEP 2
PART TYPE
A BOLT
2
12
HARDWARE FOR STEP 2
DESCRIPTION
M8X1.25PX60L-30L
3
4
A
3
QTY
3
2.1 Open HARDWARE FOR STEP 2.
2.2 Pull the CONSOLE CABLE (3) away from the treadmill
base frame. Connect the CONSOLE CABLE (3) from
the MAIN FRAME (2) to the CONSOLE CABLE (3)
in the bottom of the RIGHT CONSOLE MAST (4).
The other end of the CONSOLE CABLE (3) should be
located at the top of the mast.
2.3 Attach RIGHT CONSOLE MAST (4) to MAIN FRAME
(2) using 3 BOLTS (A).
3
NOTE: Be careful not to pinch any wires while
assembling the console.
NOTE: Do not fully tighten bolts until the end of
STEP 4.
A