Worx Sonicrafter WX677 Mode D'emploi page 11

AppLICATION
wARNING: The sawing teeth are very sharp. Do not touch during mounting
and application. The workpiece must be clamped tightly before it is cut.
Pic
Sawing
Sanding
Rasping
Removing
grout
Scraping
NOTE: When plunging and sawing use a slight pendulum motion, to allow sufficient chip removal.
The saw blade lasts longer if the wear is distributed evenly. To ensure an even distribution, loosen
the saw blade, rotate it and retighten firmly.
Cut/Sand with a constant movement and light pressure.
Heavy pressure does not increase the cut/removal rate – the accessory merely wears faster.
Excessive use and heat build up drastically reduces the life of Sonicrafter (& other branded) saw blades.
High Frequency Multi-function Tool
All manuals and user guides at all-guides.com
Name
Universal Metal/Wood End Cut
Blade.
Standard Wood End Cut Blade.
Precision Wood Cut Blade.
HSS Semicircle Saw Blade.
Sanding Pad (Perforated).
Sanding Finger Pad.
Triangular Carbide Grit Rasp,
Carbide Rasp (Finger Shaped).
Carbide Grit Semicircle Saw
Blade.
Diamond-Coated Semicircle
Saw Blade.
Rigid Scraper Blade.
Flexible Scraper Blade.
Application
Wood, plastic, fiberglass,
nails, non-ferrous metals, thin
sheet metal, hardened fillers.
Wood, plastic, drywall.
Wood, soft plastics.
Thin wood, plastic, fiberglass,
non-ferrous metals, thin
sheet metal, hardened fillers,
window glazing.
Wood, plastic, hardened
fillers.
Wood, plastic, hardened
fillers.
Wood, hardened adhesives, ,
thin set, masonry.
Wood, hardened adhesives,
thin set, masonry.
Grout, porous concrete,
masonry.
Ceramic and stone tile,
backerboard.
Old paint, hardened
adhesives, caulk, carpet.
Elastic sealants, paint,
adhesive residues, carpet.
11
EN