Publicité
Les langues disponibles
Les langues disponibles
adhesion and prevents premature wear.
If one point has become worn, pull off the
sanding sheet, turn it 120° and place it on
again.
NOTE: For other various brands' sanding
pad, use smaller flange provided.
3.MOUNTING THE SUcTION DEVIcE
(See Fig. F1-F5 )
When vacuuming, mount the suction device
as shown in F1-F5.
NOTE: Using the sanding pad perforated. You
can only do the vacuuming after fitting the
dust collector.
4. OPERATING THE ON/OFF SwITcH
To start the machine, push the On/Off switch
forward so that the "I" is indicated on the
switch.
To switch off the machine, push the On/
Off switch toward the rear so that the "0" is
indicated on the switch.
5. USING THE VARIABLE SPEED DIAL
Select oscillation frequency (speed) while the
10
motor is running.
The Variable Speed Dial can be used to set
the optimum oscillating frequency according
to the accessories used and the respective
application.
High oscillation frequency:
Sanding, sawing, rasping and polishing stone
and metal.
Low oscillation frequency:
Scraping, polishing varnishes.
6. REMOVE OR INSTALL BATTERy PAcK
(See Fig. G )
Depress the Battery Pack Latches on both
sides to release Battery Pack.
After recharging, insert the Battery Pack
into battery port. A simple push and slight
pressure will be sufficient.
7. LED LIGHT
The sight light allows you to keep a clear
view under less illuminated circumstances.
To turn on the light simply press the on/off
switch. When you release the on/off switch,
the light will be off.
High Frequency Multi-function Tool
All manuals and user guides at all-guides.com
LED is also a battery capacity indicator. It will
flash when power gets low.
EN
Publicité
