Publicité
Les langues disponibles
Les langues disponibles
Your product shall run
with a connection to the
wireless network in your
house. The controls made
C
on the application shall
be provided over this
network, so the wireless
signal strength where the
machine is located should
be adequate.
5.3 Connecting the Product
to Your Home Network
and Mobile Device
You have to download the
application required to use the
HomeWhiz function from the
application store of your smart
device with the name HomeWhiz.
You shall be directed on the mobile
application regarding the steps
for connecting your product to the
home network.
Initial Setup:
1. After powering up your
refrigerator, the following
screen shall be displayed.
All manuals and user guides at all-guides.com
2. Pressing the button numbered
1 for a duration of 3 seconds
starts the initial identification
of the product to the home
network.
3. After pressing the button
number 1 for 3 seconds, a 4
digit password is displayed on
the product screen.
4. Open the network settings
C
5. When establishing connection,
menu of your smart device
and select the Refrigerator
AP network. Refrigerator AP
network asks for an 8 digit
password. The 4 digit password
is entered by repeating it twice.
(For example: If the shown
password is 5216, you should
enter 52165216.)
If you have used your
smart device with another
HomeWhiz product
previously, click on the
forget the network you are
using option.
the connection symbol shall
DK
SV
NO
FIN
IT
FL
FR
29
Publicité
