Glow Fire 106 Instructions De Montage page 5

Wall Recessed Pre-installation
Due to the many different materials used on different walls, it is highly recommended that you consult
your local builder before you install this appliance.
A. Select a location that is not prone to moisture and is located at least 36" (94.1cm) away from combustible
materials such as curtain drapes, furniture, bedding, paper, etc.
B. Create a rough-in frame with electrical (see below "framing").
C. Remove the front glass (see "front glass removal / installation" section).
D.Hold the appliance up to ensure it will fit into the framing.
Model No.
Inside106
Inside127
Inside182
Glow Fire GmbH, James-Franck-Straße 23, 12489 Berlin
Framing Hole Size
I
1030mm
1232mm
1790mm
Finishing Material
J
437mm
437mm
437mm
K
150mm
150mm
150mm
5