Black & Decker GT524 Mode D'emploi page 6

ENGLISH
Troubleshooting
If the tool does not operate correctly, check the following.
Fault Possible cause
Tool will not start. Blown fuse.
Tripped RCD.
Mains lead
not connected.
Handle not locked.
Protecting the environment
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent environmental
pollution and reduces the demand for raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at the
address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com
Technical data
Voltage
(Australia&New Zealand)
Rated input power
Blade strokes (no load)
Blade length
Blade gap
Blade brake time
Weight (excl. supply cord)
6
All manuals and user guides at all-guides.com
Action
Replace fuse.
Check RCD.
Check mains
supply.
Release handle,
then re-position.
GT524 GT535 GT545
V 230 230 230
AC
V 240 240 240
AC
W 520 520 520
-1
min 1,450 1,450 1,450
cm 43 53 63
mm 23 23 23
s < 1,0 < 1,0 < 1,0
kg 3.0 3.3 3.5
EC declaration of conformity
GT524/GT535/GT545
Black & Decker declares that these products conform to:
98/37/EC, 89/336/EEC, 73/23/EEC, EN 50144, EN 55014,
EN 61000, 2000/14/EC,
Hedgetrimmer 520 W, Annex V
L (sound pressure): 82 dB(A), L
pA
L (guaranteed) 98 dB(A), hand/arm weighted vibration < 2.5 m/s
WA
Director of Consumer Engineering
Spennymoor, County Durham DL16 6JG,
Guarantee
Black & Decker is confident of the quality of its products and
offers an outstanding guarantee. This guarantee statement is
in addition to and in no way prejudices your statutory rights.
The guarantee is valid within the territories of the Member
States of the European Union and the European Free Trade Area.
If a Black & Decker product becomes defective due to faulty
materials, workmanship or lack of conformity, within 24 months
from the date of purchase, Black & Decker guarantees to
replace defective parts, repair products subjected to fair wear
and tear or replace such products to ensure minimum
inconvenience to the customer unless:
The product has been used for trade, professional or hire
purposes;
The product has been subjected to misuse or neglect;
The product has sustained damage through foreign
objects, substances or accidents;
Repairs have been attempted by persons other than
authorised repair agents or Black & Decker service staff.
To claim on the guarantee, you will need to submit proof of
purchase to the seller or an authorised repair agent. You can
check the location of your nearest authorised repair agent by
contacting your local Black & Decker office at the address
indicated in this manual. Alternatively, a list of authorised
Black & Decker repair agents and full details of our after-sales
service and contacts are available on the Internet at:
www.2helpU.com
Please visit our website www.blackanddecker.co.uk to
register your new Black & Decker product and to be kept up to
date on new products and special offers. Further information
on the Black & Decker brand and our range of products is
available at www.blackanddecker.co.uk
(acoustic power) 96 dB(A),
WA
2
Kevin Hewitt
United Kingdom
1-7-2006