Publicité
Les langues disponibles
Les langues disponibles
EN
8.4
INSTALL THE BATTERY PACK
• If the battery pack or charger is damaged, replace
the battery pack or the charger.
• Stop the machine and wait until the motor stops
before you install or remove the battery pack.
• Read and understand the instructions in the
battery and charger manual.
1.
Align the ribs on the battery pack with the
grooves in the battery compartment.
2.
Push the battery pack into the battery
compartment until the battery pack locks into
place.
3.
When you hear a click, the battery pack is
installed.
8.5
REMOVE THE BATTERY PACK
1.
Push and hold the battery release button (18).
2.
Remove the battery pack from the machine.
9
OPERATION
Remove the battery pack and keep hands clear of
the lock out button when you move the machine.
Examine the chain tension before each use.
9.1
EXAMINE THE CHAIN OIL
Do not use the machine without sufficient chain oil.
1.
Examine the oil level of the machine from the oil
indicator.
2.
Add oil if necessary.
18
WARNING
NOTE
IMPORTANT
NOTE
English
9.2
HOLD THE MACHINE
1.
The grip area is within 100 mm behind the lock
out button.
2.
Hold the chainsaw with your right hand on the
rear handle and left hand on the front handle.
3.
Hold the handles with the thumbs and the fingers
around them.
4.
Make sure that your left hand holds the front
handle and your thumb is below the handle.
9.3
START THE MACHINE
1.
Press the lock-out button (4).
2.
Press the trigger (5) while you hold the lock-out
button.
3.
Release the lock-out button.
The chain brake must be disengaged for the chain
saw to start.
9.4
STOP THE MACHINE
1.
Release the trigger to stop the machine.
9.5
OPERATE THE CHAIN BRAKE
Make sure that your hands are on the handles at all
times.
1.
Start the machine.
10
IMPORTANT
WARNING
Publicité
