Hewi 950 Serie Notice De Montage Et Mode D'emploi page 5

Anwenderinformation | User information | Information pour les utilisateurs | Gebruikers-
informatie | Informazioni per l'utente | Información para el usario | Informacje uzytkownika
Intended purpose
The HEWI floor support is an accessory for the HEWI
support rail and serves to take the strain off the wall
fixing of the HEWI support rail.
Exclusion of liability
HEWI accepts no liability whatsoever for damage to
persons or property that occurs or has occurred as a
result of improper mounting or maintenance,
particularly if the safety instructions and other points
to note listed are not or have not been observed in
full. HEWI accepts no liability whatsoever for damage
occurring from incorrect cleaning.
Warning notices
CAUTION!
Comply with the intended purpose, stated
maximum load and fixing instructions.
Safety instructions
These instructions are intended for qualified skilled
personnel and the user of the installed product.
Following installation, the instructions must be made
available to the user.
These installation instructions are available in print
and for download at www.hewi.com/de.
Ÿ Follow with the installation instructions and
instructions for use.
Ÿ In case of questions, problems, uncertainties or
if damage occurs, contact the HEWI support
service.
Ÿ Ensure that the product is installed, maintained
and repaired by qualified, skilled personnel only.
Ÿ Check the product for damage on acceptance.
Report defects immediately.
Ÿ Install/use the product only:
Ÿ in accordance with its intended purpose
Ÿ in its original condition without modifcations
Ÿ in perfect condition
Ÿ Use original spare parts only.
Ÿ Use only HEWI fixing materials.
Ÿ Only use in closed rooms.
Ÿ
Ensure that the flooring is suitable for permanent
use of the floor support.
Ÿ Always unfold the floor support fully.
Ÿ The floor support must stand firmly on the floor.
The manufacturer and the competent authorities of
Brugeroplysninger | Brukerinformasjon | Användarinformation
Verletzungsgefahr
the country of residence of the user and/or the
patient must be informed of all serious incidents
occurring in association with the product.
Service life
Providing that the product is used as intended and
all information contained in this document is
complied with, the product has an expected service
life of 10 years.
The service life has been tested in accordance with
ISO 17966:2016.
Maintenance
CAUTION!
Risk of injury due to faults in or damage to the
product.
Service the product at regular intervals.
The user/operator must check the product for proper
functioning and potential damage at regular intervals.
In particular, maintenance comprises the following:
Ÿ checking for proper functioning (brake system)
Ÿ checking connections between individual
components (looseness/ excessive gaps)
Ÿ checking the surface (cracks/material flaking or
peeling)
Any faults must be remedied in accordance with
these installation and operating instructions.
If a fault cannot be remedied, the product must not
be used.
Disposal
Disposal of the product and packaging is subject
to the relevant national regulations.
The product is not to be reused.
Verletzungsgefahr
HEWI | 5