NUK ECO Control+ Manuel D'instructions page 50

Parent unit
• The unit will indicate that the batteries are being charged with an animated
battery icon. When the batteries are fully charged, this icon will show 'battery
full' (
• During normal operation this icon shows the actual battery level.
• Shortly after the battery icon shows 'Battery empty' (
switch off. Reconnect the power adapter to switch the parent unit back on.
The batteries will then be recharged (icon will flash).
6.3 restOring deFault settings
The Babyphone settings can be restored to their default values as follows:
Parent unit
2x
The parent unit will switch off and then on again and the settings will be
restored to the following default values:
Sensitivity:
Nightlight:
Language:
Lullaby:
Sound Alert:
Vibration:
Baby unit volume: Level 3
Timer:
7 TROUBLEShOOTING
Connection LED
on the parent unit
does not come on
Connection LED
on the parent unit
flashes
Low battery LED
on the baby unit
flashes
NUK Babyphone 10.256.267 (BM-200).indb 44
All manuals and user guides at all-guides.com
).
Press the menu button (Fig. 26).
Select the [ RESET ] option.
Press the menu button twice.
Level 3
On
English
No. 1
Off
Off
Off
• Check whether the parent unit is switched on.
• Check whether the rechargeable batteries supplied are
correctly installed and that they are not empty.
• Recharge the parent unit by connecting it to the power
supply.
• The parent unit and the baby unit may be out of range
of one another. Reduce the distance between the units.
• The baby unit may be switched off. Press the POWER
key to switch on the baby unit.
• The alkaline batteries in the baby unit are running low.
Replace the alkaline batteries or connect the baby unit
to the mains power supply.
Temperature format:
Temperature alert:
Lower temperature limit: 14°C
Upper temperature limit: 39°C
Parent unit volume:
Full Eco mode:
Manual Eco mode:
44
), the parent unit will
Celsius
Off
Level 1
Off
Full-Range
17.12.2009 14:10:00