3com 3CRWDR200A-75 Guide D'installation page 7

Connecting Your Router
Connecting to a Hub or
Switch
1. Connect the power adapter to the Router and wait for the Power LED to
illuminate.
2. Ensure that your computer is switched on.
3. Connect your computer to one of the 10/100 LAN ports on the Router.
The LAN Port Status LED should turn green.
4. Connect the RJ11 cable from the ADSL port on the Router to your ADSL
socket on the wall.
To share your Router with more than four users, you will need an additional
hub or switch. Connect a LAN port on your Router to the hub or switch (for
example, OfficeConnect Dual Speed Switch 8).
Power
Supply Unit
3Com OfficeConnect
ADSL Wireless 108 Mbps 11g Firewall Router
Your PC
Example Network with OfficeConnect ADSL Wireless 108 Mbps 11g Firewall Router
Positioning and Installing Your Router
Wireless
Users
5
Telephone
Socket
Splitter/
Microfilter Block
GB