Publicité
Les langues disponibles
Les langues disponibles
INTRODUCING THE ROUTER
Your Package Contains:
System Requirements
This Guide takes you through the basic steps necessary to install and configure
your OfficeConnect ADSL Wireless 108 Mbps 11g Firewall Router, and estab-
lish a connection from your computers to the Internet. Throughout this Guide,
the OfficeConnect ADSL Wireless 108 Mbps 11g Firewall Router is simply
referred to as the Router.
Note: 3Com recommends that you use wired (Ethernet) connection to perform
the initial setup.
• One OfficeConnect ADSL Wireless 108 Mbps 11g Firewall Router
• One power adapter for use with the Router
• Four rubber feet
• One RJ45 cable
• One RJ11 cable
• One CD-ROM containing the User Guide
• This Installation Guide
• One Support and Safety Information Sheet
• One Warranty Flyer
Before starting, ensure that:
• You already have an ADSL broadband account.
• You have a computer that has an Ethernet connection available and is
already correctly configured for communication with the Internet. Your
computer must be able to connect to the Internet via the modem, and
must have a Web browser installed.
• There are no other DHCP server devices on your local network that are
responsible for allocating IP addresses to your computers and other network
connected devices. Your Router will perform this function by default.
• If you require wireless access, you have a computer that has a wireless
802.11b or 802.11g adapter card installed.
If one or more of these conditions are not met, refer to the OfficeConnect
ADSL Wireless 108 Mbps 11g Firewall Router User Guide provided on the
accompanying CD-ROM for further guidance.
Introducing the Router
1
GB
Publicité
