3com 3CRWDR200A-75 Guide D'installation page 13

Wireless Configuration.
If you are unable to
access the wireless LAN.
• Ensure that the wireless client is set to infrastructure mode.
• If you have both wired and wireless NICs on the same computer, ensure
that the wired NIC is disabled.
• Ensure that the SSID is the same for the wireless client and the Router.
• Ensure that the Router WLAN LED is on. If not, go to the Wireless Settings
menu, and then enable Wireless Networking.
• Ensure that wireless encryption is the same for the wireless client and the
Router. If there are problems, turn encryption off on the client and the
Router until you have established a wireless connection.
11
Problem Solving
GB