Publicité
Les langues disponibles
Les langues disponibles
1.6.4
How to delete the Tampers Memory with operating mode "0"
Tampers memory is deleted automatically at next arming of the partitions associated to tampers, or manually directly from the menu.
To delete tampers memory manually from the menu proceed as follows:
1) Enter <Master / User / Installer / Technical Manager code>, press
repeatedly until TAMPERS MEM appears.
2) Press
. The tamper LED will blink.
3) Use
and
to scroll the list of inputs which caused the alarm.
4) The following after examining the list:
5) Press
to delete the Tampers Memory.
6) Press
repeatedly to exit from the menu.
IMPORTANT! A tamper event which is still present cannot be deleted.
24
twice and then press
MP500/4-8-16
UT02:...
TAMPERS MEM
TAMPERS MEM
In001:...
TAMPER
DELETE MEMORY?
MP500/16
12/01/2014 10:10
Publicité
