Publicité
Les langues disponibles
Les langues disponibles
1.5
LED INDICATIONS WITH OPERATING MODE "0"
1.5.1
How to view system status with operating mode "0"
The system status is display by the LEDs provided on keypads and readers.
Each user can view the system status detail for the part assigned to them (only the partitions on which the user is authorised to operate
will appear).
To view the system status:
1) Enter <Master / User / Installer / Technical Manager code>, press
2) Press
. The graphic systems corresponding to digits 1 to 16 appear on the second line of the
screen. The meanings are:
□ = the partition is disarmed
0
= the partition is disarmed with one or more open inputs
■ = the partition is armed
.
= the partition was not programmed
3) Press
and
to go from one partition to the next. The partition name will appear on the first line.
4) Press
repeatedly to exit the menu after examining the status.
If operating mode "0" has been selected, partitions status can be displayed permanently instead of Date-Time.
and then
.
MP500/4-8-16
UT01:MASTER
SYSTEM STATUS
SE01:...
□□0□■...
MP500/16
12/01/2014 10:10
19
Publicité
