Publicité
Les langues disponibles
Les langues disponibles
1.6.2
How to delete the Alarms Memory with operating mode "0"
Alarms memory is deleted automatically at next arming of the partitions associated to the alarm, or manually directly from the menu.
To delete alarms memory manually from the menu proceed as follows:
1) Enter <Master / User / Installer / Technical Manager code>, press
repeatedly until ALARMS MEM appears.
2) Press
. The alarm LED will blink.
3) Use
and
to scroll the list of inputs which caused the alarm.
4) The following after examining the list:
5) Press
to delete the Alarms Memory.
6) Press
repeatedly to exit from the menu.
1.6.3
How to examine the Tampers Memory with operating mode "0"
Tamper events are indicated by the specific LEDs (on keypad and readers) and stored by the control panel. Details on the events can
then be viewed on the keypad display.
To view details you can proceed in two ways:
Without entering a valid code: tampers details viewed are those which have at least one partition in common with the keypad being
operated.
1) Press the MENU key and then press
2) Press
. The tamper LED will blink. The inputs are identified as "<Logical address>:<Name>" on
the second line. For example, an input to which the kitchen detector is connected with logical
address "3" and named "Kitchen" will be identified as "In003:Kitchen".
3) Use
and
to scroll the list of inputs which triggered the tamper event.
4) Press
and
to see the input customisation.
5) Press
repeatedly to exit from the menu after examining the list.
Entering a valid code: tampers details viewed are those which have at least one partition in common with the keypad being operated
and the valid code entered.
1) Enter <Master / User / Installer / Technical Manager code>, press
repeatedly until TAMPERS MEM appears.
2) Press
. The tamper LED will blink. The inputs are identified as "<Logical address>:<Name>" on
the second line. For example, an input to which the kitchen detector is connected with logical
address "3" and named "Kitchen" will be identified as "In003:Kitchen".
3) Use
and
to scroll the list of inputs which triggered the tamper event.
4) Press
and
to see the input customisation.
5) Press
repeatedly to exit from the menu after examining the list.
repeatedly until TAMPERS MEM appears.
MP500/4-8-16
twice and then press
twice and then press
UT02:...
ALARMS MEM
ALARMS MEM
In001:...
ALARM
DELETE MEMORY?
MP500/16
12/01/2014 10:10
SYSTEM STATUS
TAMPERS MEM
TAMPERS MEM
In003:Kitchen
MP500/16
12/01/2014 10:10
TAMPERS MEM
In003:Kitchen
MP500/16
12/01/2014 10:10
23
Publicité
