Elkron MP500/4 Addendum Au Manuel D'utilisation page 30

1.4 DK500M-P PROXIMITY KEY READER
Ref. Description
LED (green)
A B
associated
C D
partition status
LED (red)
alarms and
E
indications
Transponder
F
IMPORTANT! Mode 0 is not EN50131 compliant.
18
Figure 2 - DK500M-P proximity key reader
Use or indications provided / Operating mode = Mode "0"
•
Off = all partitions associated to the LED are disarmed
•
On = all partitions associated to the LED are armed
•
Blinking * = at least one partition associated to the LED is armed
•
Off = no indications for the partitions associated to the reader
•
On = alarm indication stored for the partitions associated to the reader or tamper or system
failure
•
Blinking = presence of at least one open input in the partitions associated to the reader
The LED will light up fixed if there are alarms, or failures and open inputs at the same time.
This LED lights up to indicate the need to check indication details on the keypad.
DK30 proximity key sensor
MP500/4-8-16