Publicité
Les langues disponibles
Les langues disponibles
Make sure the French Fry Cutter is mounted to a solid surface. DO
NOT mount to drywall that has no structural support behind it. The
French Fry Cutter needs to be mounted to the studs of the wall or
any other solid surface.
When mounting the French Fry Cutter, position it at a distance from
the floor that is at a comfortable height and will provide the best
leverage for cutting a potato.
Mount the French Fry Cutter through the mounting holes on the four
(4) feet using appropriate sized bolts (not included) (Figure 3).
To mount your French Fry Cutter on a table top or stand, simply lay
the French Fry Cutter down onto the legs and secure to the work
surface using the appropriately sized screws (not included).
NOTE: Even though Horizontal Mounting is an option, it is
recommended to mount the French Fry Cutter vertically on a
structurally supported wall. More leverage can be applied when
mounted vertically than can be applied mounted horizontally.
1. To install the Suction Cup Feet to your French Fry Cutter, place
the Bolt of each Suction Cup through the holes in the Feet of the
French Fry Cutter.
2. Thread the NY lock Nut onto each Bolt tightly (Figure 4).
3. Press firmly down on the French Fry Cutter to create suction
between the work surface and the French Fry Cutter. Suction
Cups work best on smooth, horizontal surfaces. To create more
of suction, a damp cloth can be swiped across the Suction Cup
prior to adhering. Be certain to check the stability of the French
Fry Cutter to the work surface, prior to using.
NOTE: The Suction Cups are not meant to be used on a vertical
surface. Use the Suction Cups for horizontal mounting
purposes only.
Suction Cup Feet
5
Publicité
