Intended Use - Alpina GLA-1006 Manuel D'utilisation

dropped in water. Have it checked in a specialist workshop before
using it again.
■ Always place the device on a dry, even, firm and heat-resistant
surface. Never place the device on a soft surface. The ventilation slots
on the bottom of the device must not be covered. Otherwise it could
overheat and be damaged.
■ Do not place the device on or next to heat sources such as hobs
or ovens. Keep naked flames, e.g. burning candles, away from the
device and the connecting cable.
■ Do not expose the device to extreme temperatures, persistent
moisture, direct sunlight or impacts.
■ Make sure that the connecting cable is not squashed, bent or laid
over sharp edges and does not come into contact with hot surfaces
(e.g. of the device).
■ Never place objects on the device or the connecting cable.
■ Use only original accessories from the manufacturer in order to
guarantee that there is no interference that may prevent the device
from working and to avoid possible damage.
■ After use the appliance needs to cooldown. Avoid to unplug the
appliance from the net socket before the cooling process is finished
and when the fan has stopped running. The remaining hot air can
damage the appliance.

Intended Use

• This device works with hot air and is not a conventional fryer that is filled with
oil or deep-frying fat. It is suitable for frying, baking, grilling, drying, keeping
warm or de-frosting food. It generally works like a conventional fan oven.
• The device is not suitable for preparing or heating liquids such as soups or
sauces.
• The device is only suitable for private use, not for commercial use or use
similar to home, e.g. in hotels, bed and breakfasts, offices, staff kitchens or
similar.
• The device should only be used as described in these operating instructions.
Any other use is deemed to be improper. Incorrect operation and incorrect
handling may cause faults with the device and cause injury to the user.
• The following are excluded from the warranty: all defects caused by improper
handling, damage or unauthorized attempts at repair. The same applies to
normal wear and tear.
6