Before Initial Use; Basic Use Of The Device - Alpina GLA-1006 Manuel D'utilisation

1800w 220-240v~50/60hz
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

After use, remove the hot rotisserie spit from the cooking space using the
removal tool (see the "Removal Tool" section). Always use oven gloves to
remove the rotisserie spit forks and take off the grilled items
Removal Tool
The hot rotisserie spit is taken out of the cooking space using the removal tool.
1. Place the ends of the removal tool under the shaft.
2. First lift up the right-hand side of the shaft and move it forwards a little until the
left end of the shaft is released from the holder.
3. Carefully lift the rotisserie spit out of the cooking space and place down on a
heat-resistant surface.

Before Initial Use

1. The device should be used for the first time without any food in it as it may
produce some smoke or odours due to coating residues. Allow the device to heat
up on the highest temperature setting for approx. 15 minutes without any food in
it (see the "Basic Use of the Device" chapter).
2. Thoroughly rinse all accessories. Follow the instructions in the "Cleaning"
chapter to do this.

Basic Use of the Device

PLEASE NOTE!
■ Do not place food that is still packed in plastic wrap or plastic bags in
the device.
■ Only ever place down the hot accessories on a heat-resistant
surface.
■ Make sure that the food that you would like to prepare does not
come into contact with the heating element of the device.
■ Keep the device clean. Any dirt and contamination could start to
burn and possibly cause faults.
The door of the device must be closed for settings to be made and buttons to be
pressed.
After switching off the device, the
cool down the device. The fan symbol flashes.
The device has overheating protection. It switches off if it is overloaded. In this
case, pull the mains plug out of the plug socket and allow the device to cool
down completely.
1. Place the main unit on the kitchen unit or another dry, clean, flat and
non-heated work surface. Ensure that there is sufficient clear space at all
sides.
fan continues to run for a few seconds to
10

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

871125219568

Table des Matières