Publicité
Les langues disponibles
Les langues disponibles
3. TRANSMITTER BATTERIES
a/ Open the battery compartment lid on the underside of
the transmitter.
b/ lnsert fully charged rechargeable batteries or new AA
batteries observing the correct polarity. Close the cover on
the battery compartment again. Ensure that the cover clicks
properly into place. Check that it is in its correct position.
4. GETTING STARTED
Always turn on the transmitter first,
then the vehicle!
5. BINDING
a/ Please turn on the car power.
b/ Please press the BIND and hold it, and turn on the POWER.
Let go of the BIND bottom, so it will enter to Binding process.
c/ Once the lights goes to Stable Green lights,then the Binding
process have been done.
6. USE
Left
· Raise the tyres off the ground The wheels are to follow
the steering direction.
· lf the wheels operate in the opposite direction,
operate the servo Reverse switch (ST in position REV).
· To regulate the driving speed, actuate the throttle/brake
backwards (forward driving, accelerating) or forwards (braking, reversing)
Neutral
Right
braking, reverse
movement
driving forward,
to give speed
- 3 -
ADVICE
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the
model before being charged.
• Rechargeable batteries are only to be charged under
adult supervision.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the model.
• The supply terminals are not to be short-circuited.
• Regular examination of transforrmer or battery
charger for any damage to their cord, plug, enclosure
and other parts.
BIND button
Steering neutral point
adjustment
Pairing the transmitter
Switch on the
transmitter
Power adjustment
potentiometer
Publicité
